Fiat 480 Price in Pakistan 2024

This blog is all about the latest New Holland Fiat 480 Price in Pakistan 2024. Al Ghazi Tractors Limited produced the New Holland NH 480 tractor at the DG Khan facility in Pakistan. AGTL has improved the tractor’s performance through value adds. The firm is the market leader in the 55 horsepower sector. Al Ghazi launched different models like 640, NH-70-56 4WD, NH Dabung and NH-Ghazi.

Fiat 480 Price in Pakistan 2024

Below is the latest Fiat 480 Price in Pakistan 2024 with Specifications.

Note: The Latest Update was updated on 01 January 2024

2024 Fiat 480 Overview

For agricultural purposes, Fiat tractors are favoured in Pakistan. NH480 is the undisputed king of PTO power when it comes to threshing wheat. Even at temperatures exceeding 45 degrees Celsius, the Fiat tractor does not become warm or hot. Its main competition is the Massey 240, which is designed for haulage rather than agriculture.

The NH Fiat 480 SP 2WD tractor consumes less fuel than the MF240, making it appropriate for equipment such as rotavators, cultivators, and mould board ploughs. In Pakistan, FIAT 480 tractors are offered for purchase through a firm dealership.

Al Ghazi Tractor Price in Pakistan 2024

Also Read

The factory guarantees delivery within two weeks. Except for rubber, electrical components, and the Fuel Injection Pump FIP, Al Ghazi Tractors offers a one-year or 1200-hour warranty on spare parts. Private display rooms around the country are also available for purchase. This model is also available for sale in other countries.

2024 Fiat 480 Specifications

ENGINE POWER
At Fly Wheel                    55 Horse Power (2WD)
OPERATING WEIGHT
1710 KG
ENGINE
New Holland 8035.06 
4-Stroke, direct injection diesel engine
Number of cylinders:      3
Bore and stroke:          100 x 115 mm
Piston Displacement:   2,710 cc
Compression ratio:      17:1
Max. Torque at 1,500 rpm:     22.7 kgm
Dry-type cylinder liners
Water-cooled, Four-row brass tube & copper fin radiator
Forced-feed lubrication system
Distributor-type fuel injection pump with a mechanical speed governor
Vertical exhaust muffler

FILTERS
Air: Oil bath with pre-cleaner
Fuel: 2 replaceable cartridges.
Oil: Easy-to-change, continuous flow cartridge.
CLUTCH
Dual plate, dry-type, with separate controls (pedal for transmission and hand lever for PTO)
Diameter of plates:      11 inch
Plate facing of asbestos compound
TRACKS
Front (8 positions):
1.320 – 1,420 – 1,520 – 1,620- 1,720 – 1,820 – 1,920 – 2,020 mm
Rear (8 position):
1,200 – 1,300 – 1,400 – 1,500- 1,600 – 1,700 – 1,800 – 1,900 mm
BRAKES
Service dry band-type with mechanical control
Parking: with hand lever
STEERING
Manual, recirculating ball type, centre relay lever, joints lubricated for life
CAPACITY
Fuel tank: 54 L
Engine oil: 8 L
Hydraulic Transmission: 18 L
Rear Axle: 2+2 Lat on both sides
Air Cleaner: 1 L
TYRES
Front: 6.00-16 Inches
Rear: 12.4/11-28
DIMENSIONS
(With 6.00-16 and 12.4/11-28 tyres)
A: Wheelbase: 1,920 mm
B: Overall length: 2,960 mm
C: Height to top of hood: 1,390 mm
D: Height to the steering wheel: 1,490 mm
E: Front track (8 positions): from 1,320 to 2,020 mm
F: Rear track (8 positions): from 1,200 to 1,900 mm
G: Ground clearance under front axle: 480 mm

TRANSMISSION
Gearbox with constant-mesh gears: 8 forward and
2 reverse speeds;
Synchromesh on 3rd, 4th, 7th and 8th speeds
Differential with pedal actuated lock and automatic disconnection
Single-reduction spur gear final drives
Gear Box mounted starter safety switch
FRONT AXLE
Telescopic type, inverted U, variable track
POWER TAKE OFF PTO
6 spline shaft – 35 mm dia
Fully independent: 540 rpm at 2,160 engine rpm
High-speed DTO  35 mm dia same speed as an engine for application of high-speed implements.
HYDRAULIC LIFT
With draft and position control, Draft control through the top link, Gear type hydraulic pump driven from engine crankshaft, Pump capacity: 22.7 1/min
Relief valve opening pressure: 150-170 kg/cm2
3-point linkage Cat I-II
Manual response control
Lower links with sway restrictors
Control Lever with safety stop.
Max. Lifting capacity: 1,450 kg
BODY
The Hood has a side-hinged cover for engine inspection. The front grill is easily removable for quick access to air cleaner and battery.
DRIVER’S SEAT
Fully upholstered with parallelogram suspension, adjustable to driver’s weight.
LIGHTING SYSTEM
With 3-position headlights, a plough lamp, a blue high-beam warning light on the dashboard, low oil pressure warning light.
ELECTRICAL SYSTEM
12 Volt starting system, 4hp (3kw) starter motor, 400 watts alternator, 100 ah battery.
OPTIONAL
Canopy, Towing hook, Swinging Drawbar, Cold Starting aid, Front weight, High Clearance Kit, Low Clearance Kit, DTO pump applications Creeper gear etc.

FAQ about the 2024 Fiat 480